Voltar ao blog
Dicas e Cuidados 2026-11-14 Eighth Generation | Authentically Native Designed | Wool Blankets 0 visualizações

Rotor Adapter Kit: Matching Adapters to Rotor Size

Rotor Adapter Kit: Matching Adapters to Rotor Size

Use a Center Lock to 6-bolt adapter only within its stated rotor limit. Learn how to match adapters to rotor size and spot spacing problems before you buy.

Start with the hub, not the rotor

A rotor adapter kit solves a specific mismatch: your hub and your rotor use different mounting systems. The Problem Solvers Center Lock Adaptor is designed for Shimano Center Lock compatible hubs and 6-bolt disc brake rotors. If your hub is already 6-bolt, this adapter is not the part you need. If your rotor is Center Lock, it will not mount to this adapter either.

Before you order, check the hub shell marking and count the rotor bolt holes. The adapter bridges Center Lock splines to a six-bolt rotor pattern, so both sides of that equation must match the product description.

What the Center Lock Adaptor actually does

  • Rotor Adapter Kit: The Problem Solvers Center Lock Adaptor allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. This is the core compatibility rule. Confirm your hub is Center Lock and your rotor is 6-bolt before anything else.
    Rotor Adapter Kit
    Rotor Adapter Kit
  • Rotor Adapter Kit: Designed for use with Center-Lock hubs and 6-bolt disc brake rotors. The adapter does not convert a 6-bolt hub to Center Lock, and it does not adapt Center Lock rotors to 6-bolt hubs.
  • Rotor Adapter Kit: Compatible with QR and 12–20mm thru-axles. Axle standard affects whether the assembled hub and adapter fit your frame or fork, so check this against your bike.

The rotor diameter limit is not a suggestion

The supplied product record states one critical limit: the adapter is not intended to be used with rotors over 180mm in diameter. That means a 180mm rotor is the largest size the record supports. Larger rotors fall outside the stated use, regardless of how well the splines engage.

If you are running a rotor larger than 180mm, this adapter kit is not the right choice based on the supplied information. Rotor size also affects caliper mounting position, but that is a separate decision from the hub-to-rotor interface.

Size and material details from the catalog

  • Rotor Adapter Kit: Not intended to be used with rotors over 180mm in diameter. This is the hard ceiling for rotor size. Measure your rotor or read its marking before assuming the adapter will work.
  • Rotor Adapter Kit: Made of AL-6061-T6 extruded, CNC-machined and broached. The material and machining process are listed, but the record does not provide a torque specification or installation procedure.
  • Rotor Adapter Kit: External spline lock ring included (and sold separately). The kit includes the lock ring, but the record does not state which tools are required to install it.

A sensible order for checking fit

  1. Confirm the hub standard: Look for Center Lock splines on the hub. If you see six threaded bolt holes instead, this adapter does not apply.
  2. Confirm the rotor standard: Count the mounting holes on the rotor. This adapter is for 6-bolt rotors, not Center Lock rotors.
  3. Check the rotor diameter: The record limits use to rotors up to 180mm in diameter. If your rotor is larger, stop and choose a different solution.
  4. Check the axle type: The adapter is listed as compatible with QR and 12–20mm thru-axles. Match that to your frame or fork.
  5. Plan for the lock ring: An external spline lock ring is included. The record does not list a required tool, so consult your hub or frame documentation for installation details.

Rotor rub and spacing: what this adapter can and cannot fix

Rotor rub is often caused by caliper alignment, pad position, or a bent rotor. This adapter changes how the rotor attaches to the hub; it is not described as a spacing correction or alignment tool in the supplied record. If your rotor rubs, check caliper centering and rotor trueness before assuming an adapter will solve it.

A brake rotor spacing fix may involve rotor shims or caliper adjustment, but those are separate from this Center Lock to 6-bolt conversion. The supplied record does not confirm that this adapter alters rotor position or spacing.

Flat mount vs post mount: keep the terms separate

  • Flat mount vs post mount adapter: These adapters change how the caliper mounts to the frame or fork. They are not the same as a hub-to-rotor adapter like the Problem Solvers Center Lock Adaptor.
  • Center Lock to 6-bolt adapter: This changes the rotor-to-hub interface. The Problem Solvers unit is designed for Center Lock hubs and 6-bolt rotors, with a 180mm rotor limit.
  • Rotor size adapter: Increasing rotor diameter often requires a caliper mount adapter, not a hub adapter. Check your frame and brake manufacturer guidance for that decision.

What the catalog does not tell you

The supplied record does not include a torque value for the lock ring, a step-by-step installation procedure, or a list of required tools. It also does not state whether the adapter changes the rotor's lateral position. For those details, use the documentation that came with your hub, frame, or brake system.

The catalog lists a standard variant only. If you need a different fitment, the supplied information does not confirm other options.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil